Symbol	Article number	a [mm]	b [mm]	c [mm]	Thickness [mm]	Anti-corrosion protection	Bearing capacity [kN] [kN]	Weight [kg]	pcs. in the packaging
SDP 90A	89801	94	94	90	2,0	Duplex	39,60	0,660	1
SDP 90B	89802	95	95	90	2,0	Duplex	180,60	0,891	1
SDP 100A	89811	101	101	90	2,0	Duplex	39,60	0,750	1

	Symbol	Article number	technical drawing PDF	Price tag	ETA	DOP
	SDP 90A	89801
	SDP 90B	89802
	SDP 100A	89811

Back

SDP - Post support

Powder-coated, decorative pillar base. It facilitates fixing of the wooden elements with concrete, assures appropriate separation between wood and substrate. Fixing with use of screws.

Dimension table

Technical Documemtation

Symbol	Article number	a [mm]	b [mm]	c [mm]	Thickness [mm]	Anti-corrosion protection	Bearing capacity [kN] [kN]	Weight [kg]	pcs. in the packaging
SDP 90A	89801	94	94	90	2,0	Duplex	39,60	0,660	1
SDP 90B	89802	95	95	90	2,0	Duplex	180,60	0,891	1
SDP 100A	89811	101	101	90	2,0	Duplex	39,60	0,750	1
SDP 100B	89812	101	101	97	2,0	Duplex	220,50	1,055	1
SDP 120A	89821	121	121	90	2,0	Duplex	39,60	0,947	1
SDP 120B	89822	121	121	97	2,0	duplex	312,90	1,120	1

	Symbol	Article number	technical drawing PDF	Price tag	ETA	DOP
	SDP 90A	89801
	SDP 90B	89802
	SDP 100A	89811
	SDP 100B	89812
	SDP 120A	89821
	SDP 120B	89822

SDP 90A (89801)

SDP 90B (89802)

SDP 100A (89811)

SDP 100B (89812)

SDP 120A (89821)

SDP 120B (89822)

Hot-dip galvanized zinc

Coat applied by immersing the object in melted zinc heated up to the temperature of about 450ºC. Obtained thickness of coating amounts to 80-90 μm, no less than 60 μm. Such a thick layer protection is recommended for products exposed to long-lasting influence of moisture, particularly for products to be used in a garden. Such coating may be covered with decorative paints suitable for galvanized (zinc-coated) surfaces.

Silver galvanized zinc

Duplex (Zn metal sheet + powder painting)

Cold-rolled metal sheet with bilaterally applied galvanized coating with weight no less than 275 g/m2 and thickness of about 20 μm. Moreover, the products are powder-painted which ensures high tightness of the coating and increased resistance to corrosion. Elements protected in such manner may be used in any place exposed periodically to atmospheric precipitation (rain, snow).

Zinc coated sheet Z275

Cold-rolled metal sheet with bilaterally applied galvanized coating with weight no less than 275 g/m2 and thickness of about 20 μm. Most often it is additionally covered with a thin layer of oil film that protects zinc against oxidation. Product edges remain not coated after punching process, but it has no negative influence on their anti-corrosion protection.

Yellow galvanized zinc

Galvanized zinc coating with thickness of 12 μm. Products covered with such coating are intended for use in dry indoors with periodical exposure to moisture (second class of use according to PN-EN 1995-1-1:2010). Anti-corrosion protection of the products is increased through chromium passivation in yellow.

Anodized

Surface treatment of metals consisting in creation of aluminium oxide by an electrolytic method. It ensures anti-corrosion and mechanical protection of surface of the product.

Painted

Products are powder-painted which ensures high tightness of the coating and increased resistance to corrosion.

Hot–dip galvanised steel sheet

Low–carbon steel for cold forming with bilateral continuous zinc coating, with the weight of at least 275 g/m2 and thickness of about 20 μm (15 μm – 27 μm). Products with such a coating are designed for use in dry areas with possible temporary exposure to moisture (1st and 2nd use grade as per PN-EN 1995-1-1:2010).